Thursday 11 April 2013

Diamond Masterclass: Selection


Last week we looked at the basic elements of a diamond. This week, we take it up a notch with a more in-depth look at the cut and shape of diamonds.

Cassandra Mamone proudly works alongside couples to create a unique, custom-made engagement ring and the cut and shape of a diamond is usually a good place to start when choosing your dream ring.

Below is a list of some the common diamond shapes and cuts:


There's a lot to choose from, right? It's a tough decision to make, but it mostly comes down to personal preference. But before you go out and buy, there a few important things to consider.

Before we look at the differences between each cut and shape, we first need to understand a few basic concepts:

Depth percentage: this is the depth of the stone from the table to the culet.
Table: this is the size of the diamond, measured from the narrow-girdle diameter.
Ratio: this is the overall diamond in length to width.
Girdle: the outer edge of a fashion stoned (usually the part that sits in the setting).
Culet: the point or flat surface on the bottom of the diamond.



Okay, now we're ready to move on. Here, we explain what to look for in your chosen cut or shape.

Round 
The Classic diamond cut, also know as Brilliant, is the most popular diamond shape for engagement rings. The depth percentage of these diamonds should range between 58-63% and the table percentage should range between 55-64%. Perfectionists, however, will look for a depth of 59-62% and a table of 56-58%.


Granita by Cassandra Mamone
Featuring approx .80ct brilliant centre diamond with
quarter of a carat of brilliants pave` set surrounding, forming a trilliant shape


Princess
The Princess diamond cut is one of few brilliant style diamond shapes with sharp, uncut corners. These diamonds are typically cut square rather than as a rectangle. Brilliant style refers to vertical direction crown and pavilion facets instead of step style horizontal facets.

Radiant
The Radiant diamond cut appears as a straight-edged rectangular or square stone with cut corners. Radiant diamond shapes have 62-70 facets.
Radiance by Cassandra Mamone
Featuring approx .80ct radiant diamond


Emerald
Emerald cut diamond shapes are usually rectangular. The optimal length-to-width ratio of this diamond cut should be between 1.5:1 to 1.75:1.

Oval
The Oval diamond cut is based upon the traditional configuration of Round Brilliant diamond shapes. With an optimal length-to-width ratio of 1.5:1, this oval diamond shape is universally acceptable as pleasing to the eye.

Pear Shaped
Pear diamond shapes are based upon the traditional configuration of the Round Brilliant diamond cut. They have a rounded end and a single pointed end, and a long pear shape diamond creates a slimming effect on the fingers. The typical diamond pear cut will contain 58 facets.

Asscher Cut
Asscher cut diamonds resemble emerald-cut diamonds, but Asscher are square. An Asscher cut diamond reveals the clarity of the diamond in the same way as an Emerald cut; showing flaws and the colour of the stone. Unless the diamond's colour is very good, you may detect a light yellowish colour in your diamond. The ideal cut for an Asscher Cut Diamond is a length-to-width ratio between 1.00 and 1.05.

Marquise Cut
Marquise cut diamonds maximize carat weight and give the appearance of a much larger diamond compared with other diamond shapes. Marquise diamonds look beautiful set with round or pear-shaped side stones. Like the Pear, Marquise diamonds make fingers look long and slender. Marquise cut diamonds may show slight colouration in lower colour grades. The preferred length-to-width ratio on Marquise diamonds are between 1.75 and 2.25.

Heart Cut
Heart cut diamonds have the advantage of a nearly round pavilion that provides beautiful brilliance. When choosing a colour grade, colour may be slightly visible in its corners. Length-to-width ratios between .90 and 1.10 for heart-shaped diamonds are pleasing to the eye.

Cushion Cut
Cushion cut diamonds have rounded corners and larger facets to increase their brilliance under candlelight. This cut varies in their degree of rectangularity. For cushion-cut diamonds pleasing to the eye, look for length-to-width ratios between 1.1 and 1.2.

We hope you enjoyed our second Diamond Masterclass!

Which cut and shape do you like the best? Which did you choose for your ring, and why? Let us know in the comments below!

Kisses,

The CM Team 

2 comments:

  1. Wow, what a lovely products all are the excellent gifts but i love more and more Heart Shaped Diamonds.

    ReplyDelete
  2. Such a nice post you have shared. Different shaped diamond looking so awesome. I like all shapes but pear cut looking so different. Please Visit:

    Pear Shaped Loose Diamonds

    Micro Pave Wedding Band

    ReplyDelete

Thanks for commenting, we love hearing from you!